Series of standard Airtac font cylinder

Products introduction :

Aluminum alloy cylinder barrel is one of the main parts of automated cylinders. The material quality we adopt in producing cylinders is 6063-T5 which possesses the merits of good abrasive
resistance and corrosion resistance after surface processing. The cylinders which are specially undergoing internal and external oxidation enjoy better quality and long-term service life. Division of surface processing: non-oxidation treatment, common anodic oxidation and hard anodic oxidation.
The fixed length of cylinder barrels: 2 meters and 2.2 meters, or an alternated length on requirements of the clients.

Principle: The pursuit of the first brand upon independent innovation of science and technology

Spirit: Integrity, Dedication, Striving, Innovation   

Value: first-class products, service and effectiveness.

Technical data of the products:

Material quality of aluminum alloy: :LD31-RCS(6063-T5)

Chemical composition:

Cu:<0.1;  Si:0.2-0.6;  Mg:0.45-0.9;  Fe:<0.35; Mn:<0.1;  Zn:<0.1;  Cr:<0.1;  Ti:<0.1; Al:the rest。

Mechanical property: Strength of extension δb(N/mm2):157;  Yield strength δ0.2(N/mm2):108; Elongation δ(% ):8 ; Rigidity: HV 400

Technical standards for aluminum alloy cylinder barrels under cold-drawing and honing:

Dimensional accuracy of inner diameter:IT9

Circularity tolerance of inner diameter:0.03~0.06mm

Tolerance of straightness accuracy:1~2mm/1m

Surface roughness: Ra≤0.4μm

External surface roughness:Ra≤3.2μm

Tolerance of wall thickness:±0.5%

Series of standard Airtac font cylinder
Product ID d D S T E 4-d1
TH032YDKM Φ32 Φ36.5 55.3 33 10 5.2
TH040YDKM Φ40 Φ44.5 65 37 10 5.2
TH050YDKM Φ50 Φ55.3 81.8 47 12 6.8
TH063YDKM Φ63 Φ68 93.5 56 12 6.8
TH080YDKM Φ80 Φ85.8 117 70 14 8.7
TH100YDKM Φ100 Φ106 145 84 15 8.7
 
Series of standard Airtac font cylinder
Product ID d D S T d1 d2 E F
TH125YDKM Φ125 Φ132 180 110 12 7 18 20
TH160YDKM Φ160 Φ168.5 232 140 17.5 11 25.5 25
TH200YDKM Φ200 Φ214 291 176     26 32.5