Series of The SMC standard thin cylinder

Products introduction :

Aluminum alloy cylinder barrel is one of the main parts of automated cylinders. The material quality we adopt in producing cylinders is 6063-T5 which possesses the merits of good abrasive
resistance and corrosion resistance after surface processing. The cylinders which are specially undergoing internal and external oxidation enjoy better quality and long-term service life. Division of surface processing: non-oxidation treatment, common anodic oxidation and hard anodic oxidation.
The fixed length of cylinder barrels: 2 meters and 2.2 meters, or an alternated length on requirements of the clients.

Principle: The pursuit of the first brand upon independent innovation of science and technology

Spirit: Integrity, Dedication, Striving, Innovation   

Value: first-class products, service and effectiveness.

Technical data of the products:

Material quality of aluminum alloy: :LD31-RCS(6063-T5)

Chemical composition:

Cu:<0.1;  Si:0.2-0.6;  Mg:0.45-0.9;  Fe:<0.35; Mn:<0.1;  Zn:<0.1;  Cr:<0.1;  Ti:<0.1; Al:the rest。

Mechanical property: Strength of extension δb(N/mm2):157;  Yield strength δ0.2(N/mm2):108; Elongation δ(% ):8 ; Rigidity: HV 400

Technical standards for aluminum alloy cylinder barrels under cold-drawing and honing:

Dimensional accuracy of inner diameter:IT9

Circularity tolerance of inner diameter:0.03~0.06mm

Tolerance of straightness accuracy:1~2mm/1m

Surface roughness: Ra≤0.4μm

External surface roughness:Ra≤3.2μm

Tolerance of wall thickness:±0.5%

SMC(A)
Product ID d D B S 4-d1 X Y
TH032SMCA Φ32 Φ60 34 45 49.5 Φ5.5 20 18
TH040SMCA Φ40 Φ69 40 52 57 Φ5.5 21 18
TH050SMCA Φ50 Φ86 50 64 71 Φ6.6 26 22
TH063SMCA Φ63 Φ103 60 77 84 Φ9 26 22
TH080SMCA Φ80 Φ132 77 98 104 Φ11 29.5 26
TH100SMCA Φ100 Φ156 94 117 123.5 Φ11 37.5 26
 
SMC(A)
Product ID d D B C E X 4-d1
TH032SMCA Φ20 Φ47 25.5 36.4 2 3 11 Φ5.5
TH040SMCA Φ25 Φ52 28 40 3 4 22 Φ5.5
 
SMC(B)
Product ID d D E M W J 4-d1 F Z
TH032SMCB Φ32 Φ60 45 34 49.5 4.5 5.5 20.6 14
TH040SMCB Φ40 Φ69 52 40 57 5 5.5 22 14
TH050SMCB Φ50 Φ86 64 50 71 7 6.6 26 19
TH063SMCB Φ63 Φ103 77 60 84 7 9 38 19
TH080SMCB Φ80 Φ132 98 77 104 6 11 60 26
TH100SMCB Φ100 Φ156 117 94 123.5 6.5 11 61.5 26
 
SMC(C)
Product ID d D E M F 4-d1
TH032SMCC Φ16 Φ38 29 20 7 3.6
TH040SMCC Φ20 Φ46.8 35.6 25.2 11 4.8
TH050SMCC Φ25 Φ52 40 28 11 5.5